How much of the Illinois roofing exam is safety?
Safety is the largest content area on the Illinois Residential roofing exam: 25 of the 80 questions come from Safety and Employee Protection. The exam is closed book, and you need a score of 70.
OSHA, the Occupational Safety and Health Administration, develops workplace safety rules, works with the states, updates rules and regulations, and investigates deaths. The exam tests whether you know what those rules require on a roofing job. Most of the questions come down to a specific number or a specific rule.
| Safety topic | What the exam asks about |
|---|---|
| Fall protection | The height where it is required, and the types |
| Ladders | When one is required and how it is set |
| Protective equipment | What is required for each hazard |
| Chemicals | Container labels and Safety Data Sheets |
| Asbestos | What counts as asbestos-containing, and what to do about it |
| Electrical | Cords, tools and grounding |
| Written plans | Which plan applies when |
| Equipment | Kettles, LP gas, cranes and generators |
| Injury reporting | How fast a contractor has to report |
What are the types of fall protection?
There are three types of fall protection: guardrails, safety nets and personal fall arrest systems.
Fall protection is required on unprotected sides and surfaces once they reach a set height. There is an exception for some residential work, and it comes with a written fall protection plan.
What ladder rules are on the Illinois roofing exam?
The exam asks when a ladder is required, how far out to set the base, how far the top has to extend, and how far a ladder has to stay from electrical lines.
- Where it sits. On flat, stable ground, with barricades to traffic.
- No moving. A ladder must not be moved or shifted, especially when someone is on it.
- No splicing. Ladder sections are not tied or fastened together to get more length.
- Electricity. Ladders with conductive sides should not be used near electricity.
Setting the base is also a calculation. For the worked example, see our Illinois roofing exam math page.
What personal protective equipment does a roofer need?
A roofer needs head, eye, hand and foot protection on the job, plus respiratory protection when airborne contaminants or dust are present. The hazard decides the equipment.
What does the exam ask about chemical labels?
Chemical containers are required to be labeled, and an employee working with solvents or chemicals must review the Safety Data Sheet (SDS) before working with those materials.
Why is asbestos on the roofing exam?
Asbestos can be present in older roofing materials, roof cement and tile products, and the danger is the airborne fibers or dust.
What does the exam ask about cords and power tools?
The exam asks which extension cords are allowed on a job, how a safe power tool is marked, and what a contractor has to do if ground-fault protection is not used.
Electrical hand tools should be double-insulated, and a double-insulated tool carries a marking that says so.
What written safety plans does a roofing contractor need?
The safety section covers four written plans and programs. Each one applies in a different situation, and the exam expects you to know which is which.
| Written plan or program | What it is for |
|---|---|
| Emergency action plan | What happens in an emergency: escape routes, shutting down, and accounting for everyone |
| Exposure control plan | Protecting employees from bloodborne pathogens |
| Fall protection plan | Used when an employer relies on the exception to personal fall arrest |
| Assured grounding program | Used when ground-fault circuit interrupters are not |
What does the exam ask about kettles, LP gas, cranes and generators?
The exam asks where each piece of equipment is placed, who is allowed to run it, and what to do when something goes wrong.
- Kettles. Kettles produce toxic fumes. Know where a kettle is set and which way the lid opens.
- LP gas. Liquefied petroleum gas heats kettles and torches. Know where it collects, how to find a leak, and what to do if it catches fire.
- Cranes and forklifts. Know who can operate them, how often they are inspected, and how a load is lifted.
- Generators. The hazard is carbon monoxide, a colorless, odorless gas. Know where a generator can and cannot run.
Does a contractor have to report job-site injuries?
Yes. A contractor has to report a fatality, and has to report a hospitalization, an amputation or the loss of an eye. Each has its own deadline.
How do you study the safety section?
Study it as a list of rules with a number attached to each. Safety is the one section where field experience helps least, because the exam wants the rule as written, not how your crew does it.
The exam is closed book, so those numbers have to be in your head when you sit down. In class we go through the safety chapter rule by rule, then you drill it with First Try, our practice tool, before exam day.
Common questions
How many safety questions are on the Illinois roofing exam?
The Residential exam has 80 questions, and Safety and Employee Protection is the largest content area with 25 of them. The exam is closed book, and you need a score of 70.
What safety topics are on the Illinois roofing exam?
Fall protection, ladders, protective equipment, chemical labels and Safety Data Sheets, asbestos, cords and power tools, written safety plans, kettles and LP gas, cranes, generators, and injury reporting.
What are the three types of fall protection?
Guardrails, safety nets and personal fall arrest systems.
Why is asbestos dangerous?
The danger of asbestos is the airborne fibers or dust.
What protective equipment does a roofer need?
Head, eye, hand and foot protection on the job, plus respiratory protection when airborne contaminants or dust are present.
Learn more: our Illinois roofing exam prep course, or call (773) 635-0099.
Get Your Illinois Roofing License
Live in Rosemont or on Zoom. We teach to the test and guide you through the paperwork.
